Ducati Sporting Club UK - Valve shim adjustment

Ducati Sporting Club UK (/msgboard.php)

- 999 / 749 (/forumdisplay.php?f=84)

- - Valve shim adjustment - when? (/showthread.php?t=32713)

I checked mine at 6,000 miles and had two valves total that were out of spec and needed adjusting. Funny thing, it was the left intake opener on both cylinders. Everything else was dead center of the specs!! I will always check them every 6,000 but odds are they'll never need adjusting again...from what I've heard.

(oh yea...2005 749s)

Quote:

Originally Posted by lancisto

Had this conversation with my dealer today. My bike has now covered 6000miles, but in March the belts will be due. Question was, do I have the valves checked soon and bring the belt change forward; as it would be daft not to change them while it was apart, or go over the schedule and wait until March and have both done then.
Conclusion was, as long as I was not planning on putting more than a few thousand miles on before March it would be ok to leave. This decision was helped by the fact that the bike came from them new, and they knew that all the service schedule was spot on to date.

Exactly the same scenario for me too. March it is then!