JPM.....
 

....he did credit you with the bracket design.... I just have to work out how to fit this to the subframe!!!

And credited the sidestand cutout to Lily!!

Tim

It's a doddle mate, if you need any help let me know, takes about 10 mins tops

JPM.....
 

....did you remove the seat catch assy and drill a couple of holes in the top of the subframe? Then bolt the bracket to the subframe?

Ta
Tim

p.s. When its done, I reckon my bike will look surpisingly similar to yours!!!:frog:

Complete with BOBJOHNSONREPLICA stickers? :D

What a replica of a replica???

Tim,

What you need to do, is remove the locking bracket, I just cable tied mine to the subframe, the two holes you then have in the subframe are where you mount the bracket, dunno if yours came drilled, probably not, 2 minute job though.

Then screw that to your subframe, on the seat unit you should see 2 circles on the top, which lined up perfectly on mine to the bracket, so drilled through there, and then marked the top of the bracket, drilled the top of the bracket, then put 2 Dzus fasteners on to hold the seat asseumbly in place with the bracket.

HTH

Does anybody have a recommendation for colour impregnated fibreglass - need some ZX6RR body work for my new toy

Barry you say, mmm
 

Can he do carbon panels or just GRP. Im still after a bellypan. :D

Think he only does GRP to be honest, give him a bell, he can only say no can't he?

I am glad i got some appreciation for it as the reason I now have a very expensive repair bill for my standard panels is the fact that I had just taken the track panels off for him to take a copy when i binned the bike :(

Tim - when you suss out the seat bracket do you want to let me know :) I have been looking at my bracket and trying to guess what to do. Will try and follow Freak's guidelines, but as a bird I am not always that competent :lol:

Just like to add that you can get bargains from shopping around.

I got the below in an auction from EBAY.

It 's an original Ducati Performance kit in AV fibre and I'm pleased to say the holes all line up with my road nosecone too.

One happy bunny....just need to think of a decent colour scheme now. Any arty, graphics type out here fancy earning some cash for their serivces!!!

Guido