I too can recommend Phil at Highview.....
 

.....a top guy and very helpful..

Tim:frog:

Excellent thread, so who can help me?

I have a Sony Digital Video Handycam DCR-PC1E, it is about 5 years old and doesn’t appear to have a “video in”.
The input/outputs are as follows;

S video out
DV out (Sony I link)
LANC
Mic (plug in power)
Audio/Video out

Is there any way that this can be adapted to take video in from a helmet cam???
Or is my only option a tank mount for the camera?
And if so where do I get a good one of these?

Cheers, Roy

Roy,

Not too sure about the PC1E. If you bring it to Cadwell with you we can check it with one of my mini-cams to see if you get a picture when you turn it to the VCR mode.

I know you can 'reverse' the DV-in setting on the camera's main board as this used to be 'de-activated' on some European models of camcorders due to licensing rights etc.

Cheers Guido, will do.

Roy

any views on my digi cam...a JVC GR-DX25EK.

Since discovered (I think!) that it does not have the required AV in.

Can anyone more techie confirm this and is there anyway around it?

As for the camera mount Roy...I see in Demon Tweeks mag they have them for about £35...worth considering if you go down that route.

A mate of mine, an engineer, actually made up his own that bolted to a couple of points on the bike around the Dash area (on a ZX6). May be worth considering if worried about stability and being rejcted from trackdays because of this?

I still have my old suction tripod if anyone wants to borrow it for Cadwell (i.e. Roy A)

Just let me know and I will dig it out.

Gc

Cheers Guy, that would be great.

Anyone know if they are allowing them on track?

Good question Roy...Monty, WJB...anyone.

Time for a couple of U2U's me thinks.

[Edited on 29-4-2004 by Harv748]

Roy,

here's a link that I was talking about above that does mention enabling DV-in on the Sony PC1E

http://www.megavizyon.com/DVfree.htm

Hope it helps.

Regards, Guy

Thanks Guy, but I remembered that a couple of years ago I bought a DV Enabler from Jessops, but I couldn't get it to work. Had a hunt around and found it, re-read the instruction and hey presto DV IN apears on the screen. So I will bring it to Cadders and if I may, try one of your mini cams in it, don't want to splash on one if it doesn't work, but it's looking promising:sing:

Cheers, Roy