As an update. Mr Exhaust man 2 has had a look and for more money will change the headers to equal lengths, change the link pipe, collector and route to the same silencer but for more money than I am prepared for.

Think I will be scouring EBay for a 2 into 2 system. If anyone has any bits please let me know. Will be looking for complete headers (perfer 2 into 2), link pipes and high exiting cans.

Alternatively if anyone has any good suggestions for a full system please let me know.

Cheers
Mark

Mark - reckon you will be looking at £300 plus for the lot, so unless its mega money may be better to get teh guy to do it

Viper do a set on ebay which Craig has fitted to his (I think - pictures look the same)

Also bear in mind those of us with high level cans do have a few heel clearance issues with rear sets fitted, its not just me.

I seemd to remember JAC did some underseat exhaust for a few guys in the past so that might be an option.

mmm bit more thinkin required.
M

All yours for £230

Thats a Pair of Hi Level Sil exhausts and Monster front pipe with twin outlet collector (Just need to check its not the 900 one) that your existing rear downpipe should drop into, As seen in the garage next to you at Brands on my Yellow Class B bike

Just checked and it is a M600 front down pipe part number 570.1.029.1A

at least with the 2-1-2 set up you know it will be ok for power, none of this tailored zorsty stuff which needs hours on teh dyno to set up.

standard bike stage 2 dyno plus stage 2 k&n plus no lid plus open 48mm pipes = 50 hp :)

That sounds good to me. Will drop you a PM

cheers
Mark