Doh.........I thought that was the available ranges of adjustment, not the standard settings...

Large appologies for stupidity.

R

I'll let you off this time Ricky as it isn't made that obvious and to those unfamiliar with Ohlins would probably make the same assumption as you did.
I think you will find most of the Ohlins damping ranges have 20 to 30 clicks, 12mm of preload on a 6.5kg/mm spring gives 78kg of preload which sounds about right to me as a starting point.
I know that Ohlins forks have 18mm of preload available as I rebuilt Dallas's set on his R1 prior to Cadwell TA2.5 so looking at the fork pdf helps give the game away.

Depends what time I can skive off work!