Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   999 / 749 (/forumdisplay.php?f=84)
-   -   Which 749s or 999 decision made (/showthread.php?t=21894)

duck 16-Sep-2005 22:39

congrats, i have an 04 749s fantasic bike, face lift model looks better still.
they are way overgeared, can't go lower on the front sprocket but supersrox do a tasty ally/steel stealth rear, only 39 + 42 tooth selection though:puzzled:
i always give the front coil a spray of wd40 when i get back whether caught out in the rain or not. prevention is better than the cure and all that....
if you fancy a bit more comfort on the wrists iang is looking to do a group order for cyclecat fully adjustable clipons saving £88 off the £276 normal price

KeefyB 17-Sep-2005 06:39

Quote:

Originally posted by BIG-G
Hugger ordered, will be looking for Termi's on ebay etc unless anyone selling. Do I get the system or end can and wheres the cat located?Do I also need chip with either. I also want most power mid range.
Who are the best aftermarket suppliers for goodies?
Also need idea's for a bigger/ doublebubble screen.
See ya
G
Good luck in your Ebay search for '05 Termi's,they are rarer than hens teeth.
You have two choices,the assymetric system,(A race can and front pipe),or the full 2-1-2 system.The latter will cost the thick end of £2.5K!:o
LeoVince,Akropovic do slip on cans,...not sure if they work with the catted front pipe tho.Cat free pipes are available from dealers for about £150.Then you will need a new CPU or Power Commander to sort out the fuelling.Either way,not cheap!
Dont be tempted to buy a system for an '03-04 bike.The bend on the front pipe is differant to clear the cast swingarm.
Not seen any aftermarket screens for the '05 bikes yet,although I hear that MRA make one.The '05 screen is a lot taller than the '04.You should be able to get MRA screens from HPS.
www.bikehps.com
Other goodie emporiums are,
www.casoli.co.uk
www.ducati9.net

BIG-G 17-Sep-2005 08:16

KeefyB, thought I got up early but you get the worm.
Just watched Ducati get pole in Japan. Picking mine up 10am then on to the web to buy bits. Will leave pipes until spring and will look at MRA screen.
Thanks
G

rtomuk 18-Sep-2005 18:35

Don\'t buy e-bay termis !!
 
Quote:

Originally posted by BIG-G
KeefyB, thought I got up early but you get the worm.
Just watched Ducati get pole in Japan. Picking mine up 10am then on to the web to buy bits. Will leave pipes until spring and will look at MRA screen.
Thanks
G

The only Termi's that will fit are 05 spec because of the new swingarm ! They are due out in the next few weeks ! Sorry to spoil your e-bay shopping but hey you'll spend a grand and they won't fit !! Hope this helps !!
Rob:sing:

KeefyB 18-Sep-2005 18:51

Quote:

Originally posted by rtomuk
The only Termi's that will fit are 05 spec because of the new swingarm ! They are due out in the next few weeks ! Sorry to spoil your e-bay shopping but hey you'll spend a grand and they won't fit !! Hope this helps !!
Rob:sing:

Did'nt I say that?:puzzled:

BIG-G 19-Sep-2005 08:42

I'll start saving now to fit in the spring.
Who does the best deals on these.
Thanks
G

BIG-G 19-Sep-2005 08:45

PS, do the Termi's fit both 749 and 999 or are the systems different.
I'll go for just the can and the pipe to get rid of the cat and will this run on the standard chip
Thanks
G

Twinfan 19-Sep-2005 10:17

Slip-on (assymetric) cans are the same for all models I think. You can check the 2005 performance catalogue for the part numbers.


All times are GMT +1. The time now is 19:57.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK