The pic you sent me, is that quick release push fit into the out and return?
This tank just has male spigots screwed into tank, fuel lines pushed on.
What about the other 2 protrusions? Seen a video on you tube looks like they're linked by a pipe but hard to see.
Thanks

One is the overflow and the other is the breather

Thanks, So they can be connected breather run down to bottom of engine.

The feed and return, how are they set up? On this tank they are connected to single pipe before running to carb inlet. That's how it came to me.
It has been badly messed around with the wiring is really bad I'm surprised it runs at all.
So if i connect it up as is 2 into 1 to carbs in theory should work, carbs might flood / leak because of regulator?? Thanks

Trying to upload video to youtube, not having success.
Haven't done much more with it, had too many other things on.
3 munkeees under 3 1/2 doesn't help.
Try get more done next week, thanks for all the info so far.

I've managed (at last) to get a video on youtube, nothing special just its first run after putting it together.

Type in Ducati Bitsa first start