So, did you use 6mm or 7mm hose? :p And yeah, I'll probably cable-tie it just like you did; I'm just doing it for the filter - I don't need a tank overhaul.

I suspect the 6mm hose because it was so tight I remember having to soften the ends of the hose with a hairdrier but, I still put some clips on anyways.

F

Frank: Where exactly did you put the filter? There seem to be three options:

* on the delivery hose of the two hoses that form a "Y"
* on the return hose of the two hoses that form a "Y"
* on the single hose segment after the "Y" join

I guess there's probably not much point for option #2, but I'm curious as to where you put yours...

Oh - now THAT really is THE most CRITICAL part of the whole operation......

Only available to full members I'm afraid :lol:

:devil: - Frank

C'mon now... don't make me fly across the pond and bitch-slap you ;)

Remember, Peter Andre is my countryman & he works for me!!!

LOL - ok since I dont fancy a bitch-slapping today.

I figured the most effective place was to follow the original design and place the external filter in the single delivery line OUTLET the tank (eg before the 'Y' piece).

So can you get my quick action throttle from Chris Kelly now :devil:

Cheers - Frank

LOL, thanks mate! Seriously though, I can ship it onwards to you if you're worried about UK customs...

Nice one Number9,

I already have my FCR's so will only need the throttle and cables so, not that much of a problem BUT for anyone wanting to buy anything expensive a Duke friend in the USA is always handy ;)

Cheers - Frank

No problem Frank, keep me in mind if you ever need exxy!


Chris

It was bugging me that I couldnt remember which hose I used - just scouted around and found the hose is stamped!!!

1/4" = 6.4mm

Job done :-)

Cheers - Frank