Today made up the mounting brackets, rubber mounts under each mounting. Just needed to drill extra hole in headlight shell.

[Edited on 21-3-2005 by cmoss]

Not sure what you meant with the images C, can you expalin?

Now fitted the Dash, place well back so Brembo's don't touch on full lock, also will help with the bright light.
Now just need to mount the indicator/Petrol module, I have cut it away from Speedo housing. Need to do a bit of work with this.

How can I post multiple images ?



[Edited on 21-3-2005 by cmoss]

The Indicator/petrol module will fit underneath the dash, the wiring harness is just long enough.

[Edited on 21-3-2005 by cmoss]

C, what is the small round box with the red LED? Also have you remembered to take a pick up for the low oil pressure warning light that's normally in the tacho?

it's an led, for is meta alarm !!!!

:puzzled:

Yes the small round plastic bit is the warning led for alarm. The Dash has a oil pressure wire which links to the oil pressure sensor from the Ducati original, so all should be taken care of.

[Edited on 21-3-2005 by cmoss]

Yopu sorted out which wire supplies the feed to the oil pressure warning yet C?

Hi All further update, now fitted the indicator module, all ok so far :D now this week start to wire up the main conections then work on the speed sensor fittment.
Yeti most of the connections are straight forward and can be picked from the connections in the headlight shell with the looks of things, will double check with the old Haynes manual thou.

[Edited on 23-3-2005 by cmoss]

Its looking nice matey. I would love one of those but it looks like it may be a bit complicated for me