Ducati Sporting Club UK
Page 8 of 15 « First < 4567 8 9101112 > Last »
Show 40 posts from this thread on one page

Ducati Sporting Club UK (/msgboard.php)
-   999 / 749 (/forumdisplay.php?f=84)
-   -   Well, here goes............... (/showthread.php?t=26667)

andyb 06-Feb-2006 23:34
Quote:
Originally posted by antonye
You still need to get those cone nuts off the ignition?

Get the right sized bolt to fit into the thread of the cone nut, about 40mm long or so will do, then wind a nut onto it.
Now wind the nut and bolt into the threaded cone so you've got lots of thread in there, then wind the nut up to the cone and tighten it right up.
Now you can start to undo the bolt and it should undo the cone nut. If not, tighten up the nut some more and try again.
Finally hold the bolt and slacken the nut, then you can spin off the cone nut.

HTH.

Have you taken something?

antonye 07-Feb-2006 11:01
Yes

chillo 07-Feb-2006 17:21
Andy,

have you cut your fairing so it fits the 04/05 swingarm?
also need to mod the link pipe??
looking good;)

butch890 07-Feb-2006 18:45
Quote:
Originally posted by chillo
Andy,

have you cut your fairing so it fits the 04/05 swingarm?
also need to mod the link pipe??
looking good;)
The original pipe will clear the new swingarm,(you wouldnt believe the size of the dent that sledgehammer made!):lol:
And yes Andy they did say how special your frame is - NOW!:lol:
Butch

andyb 07-Feb-2006 19:40
Quote:
Originally posted by chillo
Andy,

have you cut your fairing so it fits the 04/05 swingarm?
also need to mod the link pipe??
looking good;)

Yeah all that to come.........:D

andyb 09-Feb-2006 20:27
ooh, ooh, ooh, my frames ready!!:sing::sing::bouncy::bouncy:

chillo 10-Feb-2006 02:22
Quote:
Originally posted by Carbon749
Quote:
Originally posted by andyb
off to jhp tomorrow................

After listening to other tales of woe on here, make sure the frame number is well masked before it's blasted and powder coated :o

whats the tales of woe for not masking your engine number?? it will still be there underneath:puzzled:

andyb 10-Feb-2006 17:01
mine was masked!:D................and i hope the shot blasting prior to powder coating removed the rust around the headstock as well!

Not bad for a £20000 bike...........

antonye 10-Feb-2006 17:04
I didn't mask mine when I had it powder coated, although I didn't have it shot blasted. The powder coat has made the frame number less obvious, but you can still see it.

andyb 11-Feb-2006 20:19
The frames back.......


All times are GMT +1. The time now is 21:48.
Page 8 of 15 « First < 4567 8 9101112 > Last »
Show 40 posts from this thread on one page

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK