new member
 

Hi All,

I've just found this forum, and thought you chaps might be able to assist me with a little problem I experienced yesterday.

First I should introduce myself. I'm Nik, 30, and I live nr Chichester, and I have a red 98 900SSie. I've fitted a power commader, Remus DP carbon cans, a Scottoiler, and recently an Autocom intercom (tops!). I do a fair few miles with my girlfriend on the back, plus commuting, and trackdays.

Anyway, yesterday I was riding back from a friend's in Gloucestershire and the clocks stopped working - no back-lighting, no tacho or temp guage, plus no indicators. Also the tail light is out (brake light still works). Fuses are all ok, so not sure where to look. Any tips would be appreciated.

The fairing side panels are off (just done belts) so I guess the fuse box might be drowned. I'm going to check it all over tonight.

Incidentally I'm looking for a r/h half fairing panel, not bothered if it's tatty. Anything considered, as long as it's cheap!

cheers,

Nik

Welcome Nik!

Sorry I can't help you with either of your questions, but I'm sure someone on here will be able to.

Cheers
Phill

So what Nik the SS list not good enough for you now...?:frog:

Darren

[Edited on 19-4-2004 by FiscusFish]

Hi Nik,

How are you doing, hope Ems all right too,

Let me know when you or any of the other guys are planning to do Pembray again.

Give me a call sometime, same numbers

Rob

Hi Rob, how are you and Di? Nice to hear from you. How's the R?

Probably won't be doing any trackdays until after June - we're going to Italy on the bike, so I'm saving my cash for the trip (and can't afford to risk crashing it!).

Still got the R?

cheers,

Nik

Welcome Nik.

Sadly i am unable to help with your problems but thought i would welcome you none the less.

Hope things get sorted soon.....

Regards

ScottyB

Hi Nik,
Welcome aboard, with regard to your probs... I am not sure how the wiring loom is set up on your bike (my SS is a 97 carb job) but I suspect it may be similar to the setup on my ST2. I have similar probs but mine included the engine cutting out from time to time.

On the left hand side near the headlight is a big multiplug seperate that and check for bad or dirty connections try wiggling it while the ignition is on to see if you get any response (before you pull it apart)
Any way thats my twopennorth....what do I know I am living with the natives:lol::lol:

Hi Nik,
Welcome aboard, with regard to your probs... I am not sure how the wiring loom is set up on your bike (my SS is a 97 carb job) but I suspect it may be similar to the setup on my ST2. I have similar probs but mine included the engine cutting out from time to time.

On the left hand side near the headlight is a big multiplug seperate that and check for bad or dirty connections try wiggling it while the ignition is on to see if you get any response (before you pull it apart)
Any way thats my twopennorth....what do I know? I am living with the natives!!!:lol::lol::lol:

Thanks Phil, I'll take a look at it tonight and let you know how I get on. Hopefully it'll all have dried out by now!

BTW Last summer when my girlfriend and I were riding up to Brands WSB a guy on a 900SSie pulled up to the pump next to us at Pease Pottage services. From memory the bike had remus cans and a DP high level screen - and DSC sticker on it. Anyone own up?!

cheers,

Nik

Hiya Nik
 

sounds!!! like mine but no where near Brands last year
got a bloooo 900ssie now with hi screen, dsc stckers and remus cans as well
If you still having probs, u2u nelly on the board or e-mail at
info@cornerspeed.co.uk
He'll definitely help you
or ride up to Mansfield and it'll be fixed quick as a qwik fit fitter.....
welcome to the board and mines a pint of sauvignon blanc, and Kwikbitch will have a pint of drambuie shandy
welcome again
mort:roll::roll: