anodising
 

is this an expensive process? small items.

[Edited on 16-3-2005 by adam]

had my yokes done recently about £10 but did not like the finish so had em powder coated. Much nicer

Starter Kits from around 100-150 pounds if means to do it yourself.:puzzled:

For me it used to be very cheap. Local company would do cash jobs, very nice too. Recently got caught with the new "minimum price -- lets just do the paper work" Ouch. Take a look in your yellow pages, wander in and see if they'll fit you in for a few notes.

Rgds Rob

[Edited on 17-3-2005 by rob41b]

DIY Kits

http://www.speed-demon.supanet.com/anodise.htm

only want my rearsets done, well just the parts which bolt onto the frame, not the foot pegs. ill look in the book for a company. thanks chaps.

Get it done by hard anodising. The more common anodising will rub off fairly quickly.

Adam

Can you let us know if you find anywhere local to you? I need something done and I'm not a million miles from Biggleswade.

Thanks

Andrew

Adam

u2u CK & AK as AK had loads done for his Monster and has a guy that does a good job.

What color you going for ?????

Cheers Dibble ill do that,I just want them in black.

With anodising you must remember that the finish on the part to be anodisied wil show through the colour, so the prep is very important.

With anodising you must remember that the finish on the part to be anodisied wil show through the colour, so the prep is very important.

wow it must be really important if you have to say it twice:lol:

Adam,

I've used a company called Protech Finishing Ltd in Northampton, Tel: 01604 792163. You want to speak to Andy Adams. They do work for the F1 industry and really know their onions. They'll strip any old anodising and redo in colour/finish of your choice, very reasonable and very fast turn-around (from memory, less than a week including posting both ways).

Cheers, Neil

[Edited on 18-3-2005 by neil748r]