First ride question
 

Just rode the 748R for the first time today, and hav a quick question about the clutch. When setting of it feels real smooth, but when changin up or down i can hear it click at the lever, but can feel it sort of click in my hand. It feels wierd, any comments or is it normal?

Slipper clutch!

Plain and simple

slipper
 

Really, thanks for clearing that up mate, can get on with learnin how to ride it now, and stop thinkin it shudnt be doin that

cheers

Is it the standard slipper or an aftermarket ball/ramp type?

I have exactly the same "feeling" and "click" on mine.... the ball/ramp version.

The 748R as standard comes with just a ramp version, so I don't know if that's the same feel, but I'd guess so.

clutch
 

Yep its a standard 748R clutch, just ramp i think!
But yeah its just a wierd feeling when clutchin to change gear,

I get it with my slipper, but only on down changes when I haven't "blipped" enough.

Tells me it's doing it's job :)

Was just about to post a question asking the same thing!

Rode yesterday for the first time since November and get a really unpleasant feeling when changing gear, almost like the clutch plates are bouncing.

Did wonder whether lubing the cable might work, but does this all sound like the same thing that Chrisiball mentioned?

Bike is a 748R with what I assume is a standard Ducati slipper clutch

Loony u mean lubing the throttle cable?

No, the clutch.

Didn't make it very clear on re-reading.

It get a strange, lumpy feeling when pulling the clutch lever in and wondered whether it was sticking?

Cool avatar by the way :lol::lol::lol:

[Edited on 21-3-2005 by L3OONY]

L3OONY....

I think you'll find that the 'clutch cable' on a 748R is self lubricating, by way of it being a hydraulic system

Really?

Well I never :puzzled:

So is this rather lumpy clutch action normal?

There is no cable as has been said, lumpy? can you expand on this?

Could be quite a few things, could be clutch plates and the basket where the teeth have mashed again the basket creating notches and causing engagement/disengagement problems for one.

No problem: -

As I remember it, when I was changing down a gear (not particularly high revs) the clutch lever appeared to almost release in stages.

It was this that lead me to wonder whether it was snagging in the cable sleeve.

I have had the bike since June last year and only done about a couple of thou, but have always felt the clutch was far more agricultural than my GSXR600 which was a smooth as silk.

The guy at Ducati Leeds told me that this is quite normal...

It doesn't appear to slip or baulk when going either up or down the box, and like all bikes, the changes are better with more load than without, it is just an unusual sensation.

Does this help or do I need to invest in the services of St Neots Ducati?

Any help always appreciated!

Well could be the typical slipper action as described above, but could quite easily be the basket and is worn slightly.

If you have never stripped the clutch it is pretty bullet proof, and unless your really messy you should be able to take it apart easily, and inspect the basket and plates.

How many miles has the bike done? or should I ask how many miles has the clutch done?

The bike has done 4,800 and I got it at 3,300.

If the original tyres were anything to go by (very square) then the bike hasn't had a particularly hard life so far.

If I were to have a tinker with the clutch, is there anything obvoius that I should be looking at/for?

Clutches have always confused me (along with automatic gearboxes) and despite pouring over howthingswork.com I've never fully understood them - which becomes obvoius when I didn't realise I'd got a hydraulic clutch!

Just take your time, make sure you have the correct tools, including one of those magnetic telescopic arms, helps to get the plates out.

There are no fluids, so nothing to worry about there, make sure you keep everything in the right order, keep the friction and steel plates in the right order and position.

Might be worth investing in a haynes manual, I know they don't do one for a 748R, but basic generic stuff will be in there

Hmmm....

Have got one of those Ducati workshop manuals (off of eBay) which will hopefully help.

What can I expect to see if its shot, other than knackered plates and lots of dust?

Have a look at this (nicked this from one of Shazaam's posts)




As you can see the basket is heavily worn, your plates will be similar also, as the plates ride up and down the basket via the clutch lever because of the worn teeth you will feel a snag in the lever as the plates catch the worn areas.

You can do one of two things here, either file the worn areas back which is the cheap option, you can only do this once or twice, or replace the basket and probably the plates also.

Brilliant, thanks JPM.

:D :D :D