carbon termis repair help
 

I need some help.

I had 2 loose rivets on my carbon termis so I have drilled them out but as I can't get the bits out of the pipes i drilled them all out hoping to take the silencer apart but I can't seem to do it :o

Any ideas Guys

[Edited on 14-8-2005 by AGE996]

copper & hide mallet, gently tapping around the end caps should break the silicone sealant and drift the caps out.

Just go steady. Once they're moving they come out pretty easy.

Thanks mate


I got a big sledge hammer :o:o:lol::lol:

Help I still can't get them apart :mad:

Why do you need to get them apart? Can't you just re rivet leaving the old bits inside the pipes.

They will rattle around won't they ???

I wish I had not drilled them all out now :(

fit an open clutch cover and you won't hear the rattle from the cans :D

Helpfull :lol::lol::lol::lol:

Hi

This may help, further down the page are articles about coring the standard cans.

http://www.ducatisuite.com/performancemods.html


The advice about getting them apart may help.

I hope its raining where you are and you are not wasting a sunny day :lol:

[Edited on 14-8-2005 by m1keyp]

Surely the fibreglass should keep the bits in place. If I filled my pipes with marbles & spanners you wouldn't be able to hear it over the clutch noise.

nope nice n sunny here :(

Went to fit standard cans for the first time and the brackets would not fit :(
so spent the afternoon making new ones.:D

Rob748b has just had his re-packed and re-sleaved in Ti.
Could try dropping him a line