breaker bars
 

who does everyone use for tools?

I need a 3/4" square drive loooooong breaker bar for the rear wheel nuts

any suggestions / links / recommendations as to makes etc are appreciated

already have the sockets

helfrauds £20 ish ~:?

Got a 36 incher for the bike and also a 24 incher that lives in the car boot for undoing wheel nuts both from Halfrauds.

Scaffold pole!!!:lol:

ditto

24 inch jobbie

Cheers
assumed they would have 1/2" only but will go have a look
Thanks

A piece of scaffold tube or as in my case a length washing line post, works a treat.:D



Chris.:burn:

one of those impact driver gun thingies that run off the battery - about £20 and does the job easy with 1 person!

Have they got enough umph to undo a clutch nut?

may look at one of those
long 3/4" drive bars seem thin on the ground - seen some on the web but not buy over the counter in / around leeds area

Yep old seat post off a cycle for me over a normal socket works a treat!!

Halfords have those 12volt impact gun things for £12.99 complete with a plastic case.

how about a 3/4 convertor to 1/2, I guess you have a 1/2 breaker bar,
:flame::burn::burn:

Honest officer, that's what I keep it in the car for :lol:

;)

thats the one...moved the rear nut after 24" bar plus extension couldnt shift it!!

Oh right, i might get one then!