Rebuild so far
 

Almost back together, need some antifreeze, brake fluid and clutch fluid, brake reservoir cap, footpegs and a few other little bits and pieces.

rhs
 

tank
 

last one
 

I dunno mate, looks to me like yo need some front brakes as well. Could be a tad embarrassing at the first roundabout!

PS: Is that Rob's motor I see in the background?

Until last week we worked for the same company therfore same company cars.

That looks ace! Wish mine even resembled that the now.

Was the frame painted or powder coated?

Im thinking of doing a full stripdown on mine making sure everything is fine after kinda breaking it..

Pwdercoat mate.

Could have given it a clean whilst you were at it...:bouncy:

All ready for a shakedown test this Sunday then at the Oxon meet!?!?

Looking good...I'm liking the black top yoke...

Cheers Harv,
I doubt I'll have the footpegs or brake cap by then:(

I've got some pegs if you want to borrow 'em?

Are they DP, and the gear lever needs to sit between the peg and the hanger?

errrmmmm...no.

Just some standard ones...thought you may have lost yours or hit 'em with a hammer or summut?!?!:P

My hammer has been confiscated:(

Original footpegs are now in a box somewhere never to see the light of day again.;)

You using race pattern shift or road?

Road

Could lend you some Ducati original rear sets just to get you mobile

Cheers for the offer Yeti, I really appreciate it.
There are quite a few little jobs that need doing on the bike which all take time and money (one of which I don't have a lot off;)) And at the moment I'm umming and arring about getting a radial brake or 4pad calipers so I don't want to put new brake fluid and bleed the system twice, so until the brakes are done it'll stay off the road in a nice warm garage.

Sounds fair enough. Would also suggest that if you gonna be mostly using it on the road, I would stick with the P4 calipers (4 pad). I assume the alternative is original equipment radials from later bikes? They are no better. Only time you will see a real imporvment is when you move into race stuff such as this, but I warn you these ain't cheap!

Sorry mate I ment radial brake M/C and P4 calipers.
I'm not very good at explaining myself this week:(

I do lurv that front end though, it's very:cool:

THOSE could stop a TRUCK :D

Nice one dave ! Looking sweet !

You got out of that training at work that soft lad had to go on all week then ???! (bless him - first DSC Swindon chapter pub meet hes missed out on so far tonight - hes gutted !!:lol:)

Nat

;)

looking good mate.

Cheers Mate,

Yup I think I'm on the next course which is 3 weeks long:o

I'm sure he'll make up for the drinking before he goes back on call, but when you see him next ask him if he had a hangover after Robs drinks the other week. I had to stop the car just passed Banbury on the M40 to empty my guts:barfy:, I think I had a dodgy bit of toast at breakie:smug:

Hey Dave looking nice mate, on schedule for the Bristol Italia day then !!!

Well impressed with the top yoke mate...

Nat apologies for the Swindon Massive absentee:rolleye::rolleye: Although did manage to drown my sorrows in Winchester though, Guiness did taste bloody good...
Dave stay away from the DWDM its a bad swear word....

Nat best get the cobwebs off the trailer....Me's itching to get the forks re-sealed...:D

rebuild piccies so far
 

take a look at these

and this

Sorry chaps there are more pictures but can't get them onto website!!!

Regards Frazelli

Looking good Frazelli:cool:

Right, still needed if anyone can help.
Push rod for torx style slave cylinder
Footpegs for Tecmoto (DP style rearsets) (the gear lever fits behind the peg)
MOT :rolleye:
And paint for the seat unit or the bip seat has to go back on:(

looking good dave, what paint scheme are you having it done in ??

Dave looking good .... plenty of nice touches. May be sticking my neck out here, but, not a lover of the fuel cap .... each to their own. Apart from that, very very nice.

Standard red with white number boards.

Cheers fella's

What ??? No Blue !!!!! :P

Did think about it I must say but sadley no.....
I'm sure the black frame would still upset a few purists:D

Dave
That stand is disgusting!

I think you've told me that before, do you fancy getting it powdercoated for me:smug::lol: