number plate bracket
 

does anyone know of anyone in the UK who can supply a number plate bracket similar to the one Evoluzione sell?want to clean up rear of bike.

Have a look here

Cheers Dude,will modify to fit below cans

or here....
 

Nelly at Cornerspeed sells em

Is anyone interested in these in Carbon Fibre, as I could make some up.

Cost would be around 25-30 quid I reckon.

Thoughts?

Can you make one that drops down between the cans?if so how much?
would deffo be interested if you can.

I can pretty much make anything ... as long as it's not too complex ;)

The "above the cans" ones are pretty damn easy, but I'll have a look at a design for an "under the cans" bracket to see if it's feasible. Would be slightly more due to the extra CF involved though.

Cheers Antoyne,i was thinking along the lines of the Evoluzione type bracket,Going to Florida on Tuesday for 3 weeks so if i don't reply just post here with price,how long etc.thanks PJ

i have a evo number plate holder, never been used. anyone interested??
cost me nearly £40 with the import duty>

I have velcro'd a 7"x1 1/4" reg plate to were the reflector used to sit.:devil:

Were can i get a bracket to fit there which would have a return on each end about an inch behind the plate?
I have a set of kellerman alloy mini indicators which i want to fit.

[Edited on 8-9-2003 by chillo]

Chillo,

Have a look at this thread for pics of the one Dude put plans together for.

Is this what you want? I'm thinking of making some in carbon if I get enough interest...

Antonye,

thats somewere near but still too big:D
will take a pic of my set up and post it.
I think mine is about 150x30mm:D
Would be interested in some carbon or i will try and get hold of a bit of alloy sheet.

[Edited on 11-9-2003 by chillo]

If you let me know the sizes I'll have a bash!

How much do you want for it? Is it an evoluzione one? Send me a U2U

Hey Antoyne,back from the USA,have you worked out a price for the bracket yet?If so could you please let me know as soon as,cheers PJ

If someone can send me some kellerman indicator, I will model them up and create a braket for both 7" and 9" number plates in CAD. I can then give the CAD drawings out to people to make their own brakets or for antonye to make up in carbon fibre

Lane, I've got one of Nellys brkts with kellermans.

Dude. I've got one broken Kellerman without the mounting plate I can send you
I can let you know the lenght of the mount.

Jon

[Edited on 4-10-2003 by Jon]

Sorry - missed this thread!

If someone lets me know the Kellerman dimensions (or Dude makes up some CAD drawings) then I'll give it a whirl.

Currently perfecting heel plates atm ;)

Jon,

You have u2u with my address.