749R slipper clutch pressure plate measurement required ?
 

can anyone who has a put billet pressure plate on a 749R let me know what the dimension the diameter of the internal bit without the teeth is please on the billet replacement or on your original one
so I can get the teeth machine out of my JHP plate please ?
thanks
as my bike is not here to measure the original one

does this make any sense ?

Graham
I machined mine out so you could just still see the teeth on the outside (1.5mm /2.0mm of the teeth left)and just touched on the internal face with a nice new tipped boring bar. Worked mint

Andy

Anyway where is your bike ?not more bits getting added ?

it's a secret !
having the new 2007 1200cc v-twin engine fitted !!!







no only kidding, it's in my mates workshop as I left it there when we went for a beer on Sunday, pick it up again when I get a minute this week

If you put a proper clutch in it...it would come allready machined.............

AndyB - you n your 'proper clutches' LOL
like my modded one at the mo
seems to work well with my new Corsa IIIs

:) does it go esthetically..............:lol: :rolleyes:

absolutely Andy !

& it does work now also :lol:

Surely thats a secondry consideration........:rolleyes:

Wot no renthal hard anodised rear sprocket and gold chain..........

ain't had time to fit any more bling m8.....been out riding it....you know how it is!

Sides of that rear tyre should last you a while though..........

You mission today is to get a hard anodised 38 tooth rear Renthal sprocket and gold ERV chain...

eh?

;) Dont you just love round and round a roundabout............;)

and.....still not polished that exhaust.............call yourself bling?

me no bling man meester Andy !
polish.....yuk !
LOL

but a Renthal does sound good
B&C still best for these ?

yup!...get the hard anodised.its a nice magnesium colour...

What are those lines around the tyre? Have you been using emery cloth on the edges.?

Bit of a misrepresentation with the number plate . Should be fitted to a 999 not a 749. WSS would have been the one!!!!!

SBK
 

erm....it does say SBK on the tank
and its in Ducatis SBK section aint it ?!

toys out of pram .!....................it is a Superbike ! yes it is !!

BY THE WAY.......for anyone reading this, I do still need the measurement at the beginning of this rambling post

LOL

Steady tiger!!!

Only kidding mate, just made me laugh that I got all these relpies but no dimension

G

DPP slipper plate is 115mm internal diameter i'd think the 749R would need to be the same as the basket will be same tooth outside diameter.

Gizmo
thanks, it is 115mm dia inside of teeth, but I need to know what the diam is on the 749R one without the teeth so I can machine them off
cheers

Buy a proper bloody cover.....or better still a proper clutch!!!!



oh yeah were back to that again.:lol:

DP don't do a pressure plate for the 749R
so this is the only option

"AndyB - you n your 'proper clutches' LOL
like my modded one at the mo
seems to work well with my new Corsa IIIs"

what was it you were saying about roundabouts ?

the 749R should be the same, the teeth are on the basket and the basket is the same between bikes cos the clutch plates fit between bikes. So, if the DPP slipper has clearance from the basket teeth the same machined out diameter will work on any slipper pressure plate as it has to clear the same teeth, if you get my drift....

if that ain't enough try measuring across the teeth on your final steel plate, and leave a little clearance, if its close to 115 I'd probably go with that :D

If you bought a proper clutch........you could measure that...........:D

AAAAAAAARRRRGGGGHHHHHHHHHHHHHHHHHH !!!!!!

Graham, if you want you can pop round here this eve if its any help and we'll whip me clutch apart for you to measure.

I thought Graham was going to get a proper clutch sorted ...

Aaaarrrrggghhhhhhhh
Flubber......hhhhmfffffffffff
Dribble

Clutch Pressure Plate Cunundrum
 

not a "proper clutch" pressure plate
ie the original 749R one



the JHP one to replace it
Slightly more proper like

ROFLMFAO

"Are we there yet?"

thanks Dougal, but yours is a proper one

may just go get the bike back now instead, make it a bit easier to measure it

that's the dimension i measured :)

bit confused now

yeah so the teeth are approx 5mm each side giving 115mm diameter