Crash Bungs
 

looking for some crash bungs that you can bolt into the frame...
just phone up R&G, and they dont do them for a 620 sport 2003 model..

any idea!!

Thanks Ian

Speedymoto?

Have you got a number???

Ian

They dont list them cos they need a hole through the fairing, but that doesnt stop you fitting them. Have a look at some of the race day pix and you'll see all sorts. And remember that you pay well over the top for the fitting kit for your particular bike. I just went out and bought some allen bolts to suit how I wanted to fit the s/h ones I bought.

www.speedymoto.com

They're a US website. You can order direct or through Spareshack. They also make bungs that go between frame and fairing if you don't want to go drilling holes. Didn't check to see if they do ones to fit your bike though.

also....one good turn etc etc....

No pic of the SS bungs sadly but a good contact anyways:

http://www.ducati-kaemna.de/cms_en/k...eite&seite=107

Frank

Get the speedy ones then at least something on the bike will be speedy :)

Bitch!!!! how are the rear sets coming along??

Thanks for you help guys,

u better get a bulk order in stumps ..!! or better still get them to hold stock..or even better get them special ones that have got big ole ball bearings in the end and are about 4 foot long.....

ring ring

" speedymoto how can i help you "

Stumpy " i would like to order 400 sets of crash bungs "

" are you a dealer sir if so we can allocate you bulk discount "

Stumpy " this aint bulk this is for my pre season track day..im so fast i fall of and dont even stop to fall off "

hehehe

Damn that hurts me....but its very true!!!!LOL

R & G do good ones for the 900ss ie and its looks like they'll fit the 620s too.

Andy

Yeah i saw they did them for the 900ss..does that have the same frame as a 620ss????

if so i will get them!!!

Thanks Ian

LMAO, unfairly harsh....................but true ;) ;) ;)

Get yourself some high tensile/ti threaded rod !!!! (coupla quid)

replace engine mount rod with the threaded one.(cut threaded one 5" longer)

grab some A@R RACING/RACE PRUDUCTS bungs about 35 quid (nc30/35 are good)

bolt on

cut fairing hole


sorted

You people have got me all wrong....I'm older and alot wiser now!!!;)

Do they fit on the early 583 as well?

If there's a bit of interest I'll machine you guys some up out of acetal. Need a few dimensions from you but they ain't rocket science to make.