Radial mastercylinder mounting
 

Hi there just got a Brake and clutch brembo master cylinders for my 01 748R.
But strugling a little with mounting the resovours so do any people have some photos of bracket ideas and fitting advice
thaks
Jamie

Should be lots on here, do a search.

I mounted mine on the SS via the yoke, but that was after removing the igintion :D

Thanks thats the idea i had also but if anyone who has got a 784 - 996 style bike with master cylinders also fitted and has got photos that would be verry much apreciated
thanks
JAmie

Somebody posted up some photos of their radials not so long ago (like last week) as I remember looking at the brackets for the reserviors myself.

I think they put a slip of metal into the clamp of the radial (where the two halves bolt onto the bar) and then it was bent out into the right shape to attach a small 15ml reservoir. No point in having a huge reservoir, as long as you keep an eye on your fluid.

Have a browse through the pics section, or in this section, to see if you can find it.

Here you go, from Keefer's "I love carbon" thread...



and

I used a longer bolt on one of the bar mounts with a spacer sleeve under it. Photo possibly attached.

Master cylinder
 

Hi there thanks for all your replys very helpfull, Got both the clutch and the brake mounted today incluing making the brackets and bleeding the system
Should have some photos soon
thanks again
Jamie

manster cylinders
 

Okgot everything fitted and seems to be working ok, so heres how i mounted my resovours !!

thats just what I did . . .
 

exactly the same brackets - very neat!

Khushy

did you make the brakets or are they off the shelf? If I keep sps then I have a brembo to fit over the winter and will probably be looking for a clutch one too
thanks

I found on my SPS that I had to have longer bars because they fouled the clocks which is an mot failure.

The brackets are . . .
 

bought - off the shelf - they are Motrax mirror bar-end mirror mounts that fit on the ends of the handlebars (I have long bars) I only used the bracket and the tapered internal bar mount - I then butchered the actual mirror mount - added a carbon rod - a titanium bolt etc and hey presto!

Khushy

Radial master cylinder
 

Just ordered some after market brembo master cylinders myself. Can you use the original brackets with the new cylinders ?