I want to Bling my Clutch
 

I plan to fit a open clutch cover with an anodised clutch plate to my 748R this winter, any recommendations on what & where to buy ? Also is it much work to fit ?

Give Neil a ring at Cornerspeed, he does these tasty items from Speedy Moto:)


http://secure.speedymoto.com/Merchan...ory_Co de=CPP


http://www.cornerspeed.co.uk/


Chris:burn:

Not much work at all, and as it happens, I have a clutch cover, red pressure plate, and red spring caps I want to get rid of!

PM me if you're interested.

as much as it pains me, I have to recommend the kit consisting of open clutch cover/clutch plate and springs that JHP sell.It fitted nicely and I even managed to do it myself ( that's a bigger feat that I can describe! )

dead easy - takes less than 5 minutes. 10 minutes if you get tempted to pull out all the plates and wipe the dust out. 20 minutes if you have a cup of tea as well.

Clutch Bling!!!

I'm certain Tony (TP) has a new and unused Speedymoto open clutch cover for sale, send him a PM.

RD

Hi, This isn't a business.....I do this for FUN but if you send me your clutch housing (outer engine cover ) i can rework it to match my works corsa cover for £30 plus p+p. I did this to my own cover, but then bought a "works magnesium corsa part" I am a craftsman and if i do say so myself i couldn't tell the difference.....apart from the weight! P.M me if your interested, This goes for anybody on the list. I also know where you can get the correct shade of green or "baby **** yellow" paint! to match the works bike of the year of your bike. No vat he doesn't need to know.
Steve
P.S. this's not the outer cover but the main cutch housing!

Here we go, Speedy Moto Pressure plate.




Chris:burn:

And with a nice open clutch cover to match:)



Chris:burn:

Steve, can you post a pic of your machined clutch housing, Ive got one I could have done!

My clutch bling on my old 749s, not everyones cup of tea and most will say the carbon gives no protection in a spill .... but I like it.

don't forget to mention when ordering that you have a 748R. the slipper clutch takes a different pressure plate without the teeth on the back. other than that, the springs and cover are the same. oh yeah, speedy moto gear is really good kit.

Hi khu996, I'll get my wife to take some pictures and try to work out how to put them up on here.
Steve

Here's The Piccie's
 

Here's The Pictures Of My Re-worked Clutch Housing As Promised.
Steve

Hi, so what do you lads think?....It's not very shiney, but "works" housing, STM Slipper clutch, s/steel springs, MPL Titanium faced basket,alloy kevlar plates and "works" RS 996 steel outer cover!.......Not the flashest looking set-up but it works:)
Steve
PS, Not to mention the works/corsa 926cc (888) carbon footrests!!!

That last picture has everything in it, all it needs is Myleeeene, in her bikini, in the shot:D :D

Hi

Does anyone know Steve or have any contact details for him? I have been emailing him to discuss getting this done but with no response yet?

Cheers

Chris

Hello cl0nd0n

try sending Mr.R a PM, i just did;)


regards


TopiToo

Whatever you do don`t go for the tarts handbag Gold look!

May one be so bold as to suggest a D.P clutch cover with a red presure plate and S/S spring caps with socket head cap screws, or a good equivalent such as JHP.

Already done this but no response from this either!

I want one done too, but haven't contacted him.

Let us know if you get a response.

Hi, everybody......My laptop caught a virus for xmas,2 weeks without the Ducati message boards = Total withdrawal! Lost a lot of info', e-mails and got logged off this board and i forgot my password. I'm only just getting up to speed.
Steve