Serious Frame Question
 

Are Titanium Frames availiable for the 620ss.............are they in the DP catalogue...!!!..no really im serious

Or do i have to commission Ducati Corse to build me one...........

its the must have for DD 2007..................................

:lol: :lol: :lol:

now you really MUST have won the lottery Phil:lol:

Dunno about the ss but the monster I'm racing next year has one ...

Along with 6 speed box, slipper clutch, radial m/c's ....

;)

anything else.?......eh eh eh.!!!

Maybe a few bits and pieces .... it's had lightweight pistons, blueprinted and balanced ... lightweight flywheel ...

barrels machined for squish :D

Stabilisers ?

just run of the mill std dd prep then...................

a list of the DD " must " haves...........lolol

Did I mention we've developed a harness to allow the addition of the new 1098 data acquisition technology?


We've also added the carbon/titanium gravel clearing unit which uses radar to detect and clear gravel and servo controlled arms to direct you back on track should the unthinkable happen ...

Nothing out of the ordinary really, standard bike in the paddock I would have thought?

No?

u got the carbon marvic wheels yeah.?....launch control..traction control...wet and dry fuelling maps...on board telemetry and real time geomtry change facility.!!!!..

No.?

No, we went with Dymag's ... but yeah, pretty much all the standard stuff plus a few bits here and there ;)

a final set of the rules would be nice too tho:)

then we can work out if we need to buy fuel from NASA or not;) :D

You're never gonna be competitive in DD with that lot...you're gonna need one of last years 990cc V4's as well, I've heard they've got a few hanging around in the factory.

Or you could wait until they come up on eBay if you're strapped for cash

And a nut holding the bars;):D:D

as long as the nut is tight and made of titanium with a big head....all is good.......

heheh

2 out of 3 aint bad though Fil.

You'll have to work on the Titanium bit. ;) :D

There's something wrong with this DD thread.. I'm actually laughing reading it... genuine humour.. must be the crimbo spirit..

Long may it continue..

i thought they were seriouse:D

See ARC Fabrications in the USA. $3000 IIRC. They are building me some bits ;)

That's what not enough of the crimbo spirit does to you... me, i'm happily spirited up.. :D

At the current exchange rate that's a bargain. Far cheaper than the magnesium casings and long-stroke crank plan.......

I reckon I could make room in my suitcase for one of those!

We looked into the rocket fuel question Charlotte but the problems of keeping the liquid oxygen liquid with the neccessary thickness of the tank walls, compressors etc added to the problems with handling the nitrogen tetroxide and hydrogen peroxide and the corrosiveness of these meant that the ACU and the circuits weren't keen. One little crash-especially on the first lap-meant that best case scenario the track got disolved, worst case the resulting explosion removed the track(and everything within about a 1 mile radius) completely...........we will try to overcome these small difficulties for 2008................:lol:

John

Oi!!!

I'm not tight ;)