FS - 996 / 916 / 748 race and road parts
 

Still for sale the following parts. cheaper prices.
See below for pictures.

Fancy parts:
- Pierobon front subframe, can fit standard clock or Digit dash - new price £120
- 998 RS wide track adjustable mag yokes - £1,500
- 16.5" wide track wheels (3.5 / 6.25) - 5 spokes - refurbished in stain black (crack test, etc. done then by Griff in Bristol). The finish is not perfect with some marking on spokes. Includes Dunlop slick tires used for one trackday. £650
- Dymag rear 16.5" wheel with big hub. Gloss black, clean, Wet tire mounted on it. £200
- Brembo 290mm wide track front discs - £130
- Brembo 320mm road fitment race discs (very clean) - £350
- Billet race caliper hanger - £150
- Spacer to mount RS big hub rear wheels on to standard axle - £100
- Slipper clutch - Ducati Performance - ball bearings, basket a bit marked - £300
- Sil Motor slip on exhausts - £200
- Ohlins steering damper - £170
- Titanium front standard axle - new, never fitted - £80


Standard parts:
- Standard 996 dual injector throttle bodies including bell mouths, TPS, subloom, injectors, etc- £120
- Reverse shift pedal - £30
- Standard clip ons - pair £45
- Swingarm black powder coated with chain runners and hub - £150
- Standard rear axle with disc and standard caliper hanger - £50
- Race nose cone - fiber glass - number board - £40
- Carbon fiber mudguard, small crack on bottom, does not affect fitting - £40
- Carbon V piece small crack - £20
- Carbon V piece ok condition - £30
- carbon airbox - originally RS but bits cut off, adapted to standard tank and standard airtubes. Clips only on one side, no side plates. £70
- standard carbon airtubes, bit tatty (no recess for clips, need to rivet small ally plates, bolt missing for indicator mounting on one side, underneath slightly unglued), £70
- Red tank - good, small paint chip, old style Ducati logo, NO pump, no cap - £130
- Water rad - tatty - £15
- 45mm clean system - £50
- Standard 1.6 ECU - £50
- Standard coils + plug leads £40

Collection from South London
Shipping at cost
Can supply photos
Payment by bank transfer - Paypal OK (fees paid by buyer)

Photos below
Tank - cap not included


Swingarm


290mm discs


airbox


SIL MOTOR exhaust


45mm system


Reverse shift pedal


Throttle bodies


Rad


Pierobon Subframe

Airtubes


carbon mudguard


V Piece


V Piece with crack


Nose cone


320mm road fitment discs

AP Thumb brake


Spacer for fitting Big hub wheels to road axle



Slipper Clutch - DP





Ohlins steering damper



RS small hub Billet Caliper hanger
(fits standard arm - spacing for race calipers Brembo or Ohlins)

Hi,

Do you still have the rear alloy sub frame for sale.

Cheers

No sorry - gone