ride height adjuster
 

Getting pretty tired of the std ride height adjuster, difficult to get at propoerly and made of Italian cheese. Thought about changing it for one from Casoli or Tecmoto (seem to be the same). Any suggestions of replacements? (other than the very trick JHP one). :lol:

Have you tried Dutch or German cheese instead?:lol::lol::lol:

Thought about one myself...AJ Racing was doing them for £30 incVAT during his sale. Don't know if he still is.

With the adjustment being made via the hex bit on the middle of the rod, it should make life easier, but i guess you'll still need to undo/redo the locking nuts each time.

For the sake of removing the left foot peg, its allmost worth taking the rod off to adjust. You can also measure its length more accurately then.

Or if you have the coorect datum tool, take it off undo and refit before adjusting using the tool.

how the hell can you remove it without taking the pin that holds the shock in place on the swingarm, and the rocker arm at the top of the
ride height adjuster

Try Fast by Ferrachi