outer clutch basket movement ?
 

right striped down the clutch today ready to be cleaned. and after I had undone the centre nut and removed all the bits I was just left with the 8 retaining bolts for the outer basket.
ok whipped them off with the windy gun then went to remove the basket.
now when I pulled it there was some sideways play in the hub about 5mm at a guess ? is it meant to be like this or do I need to take off the crank case cover and investigate further ?

Was there any oil on the seal behind the basket?

no its a relatively new seal. I just don't remember the hub moving this much before ?