57mm Termi\'s and a Burn\'t fairing
 

Hi Guys,

Late last year I had the monster 57mm termi system fitted to my bike. It's only been the last few weeks that I have been able to get out and ride it.

I've noticed that the fairing is being burned by the pipes just below the side stand. Anyone else got the same problems.

BTW i've got 04 749R, carbon fairings

You could try using some sticky foil heat-shield to stick on the fairing :)

I think Dickie had a problem with his fairing melting on his 999S. It turned out that the exhaust was mounted incorrectly and it was all fixed under warranty.

Hmmm..... where can i check the price and pics of the 57mm Termi's??

And is it a full system?

Try this ;)

http://www.ducatinine.net/pages/perf...asp?section=s1

Sorry same place.... right page.

http://www.ducatinine.net/pages/perf...+sys tems&c=9

It is the full system :sing:

The dealer has checked it out and providing it gets no worse will replace the fairing. If need be I wil put some thermal stick tape stuff on the fairing to protect it.

I know a few people on here have had it fitted, just wondered if anyone else had the same problem.

Thanks Dave.
****!!!!! That's expensive....

So the standard system that's on with my R is what a 50mm or a 54 mm?
And the racing half sytem that come with it?

Is there any movement in the pipe thats fouling the fairing... It might pay to loosen some of the fixings and give it a tweak ;)

You can get the thermal tape (Cool Tape I think it's called) from Demon Tweaks, but it is not in their catalogue or on their website. I phoned them because I was assured they did sell it. It was £20 for a roll.