![]() |
Datatool Alarm I have a datatool veto (I've been told that it was it is, is there any way of finding out?) on my ST4S. It only came with one fob so I am going to get another one, how easy/ difficult is it to programme the new fob and apart from eBay any ideas where to source one? Thanks in advance. |
They occassionally pop up on ebay and sell for about a tenner. I think they're about £35 new. It's not straight forward to program them either.... Bike ignition off and remove the inline fuse. Take both green wires, bare the ends, twist them together and attach them to a 12V supply. Turn bike ignition on, replace inline fuse and press and hold the circle button, you will hear one single beep. Release the button, count to 5 and press and hold the same button until you hear two beeps. Undo the green wires and mask (or remove) the bare ends and return everything to its original state. |
All times are GMT +1. The time now is 12:50. |
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK