Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   998 / 996 / 916 / 748 (/forumdisplay.php?f=85)
-   -   SPS Carbon heat shield (/showthread.php?t=23402)

PDL 26-Oct-2005 23:49

SPS Carbon heat shield
 
What do i have to do to get this heat shield to fit my 748 Bip?

http://cgi.ebay.co.uk/Ducati-748-916... cmdZViewItem

Is it different down pipes or can I get a bracket or something?

KeefyB 27-Oct-2005 06:48

You can get a threaded bracket that fits around the exhaust pipes.I bought one for my 996 and got the bracketss in the packet.I think they are available separately.
I may still have one or two kicking around in the garage.

[Edited on 27-10-2005 by KeefyB]

Whele 27-Oct-2005 20:47

somebody has got to say it

Buy a 996SPS

:lol:

PDL 27-Oct-2005 22:42

Quote:

Originally posted by Whele
somebody has got to say it

Buy a 996SPS

:lol:

Eventually that is the idea but also keeping the 748, but at present my budget and marriage will only stretch to a heat shield. :(

aka.eric 27-Oct-2005 22:59

Ive got this one,its used but in good condition, a couple of small chips on the front edge,with the clamps for standard pipes.Came from Rip so its good quality carbon.£20 if its any use to you.

PDL 29-Oct-2005 19:35

Sorry aka.eric only just seen your post. You have u2u.

deej 13-Nov-2005 22:27

eric if its still available i'll take it off your hands if it will fit 50mm termis

aka.eric 13-Nov-2005 23:12

Sorry,Desmo had it.The clamps were for 45mm system.The Termis I fitted had the brackets welded on the pipe,this type of guard is no good as the hole centres are different.I used a standard 998 aluminium guard,the carbon one was no longer available.


All times are GMT +1. The time now is 15:31.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK