wot air filter ?
 

i apologise if this question has been asked before but being relativley new to this site here we go !
i,ve got an 05 999s which comes with half system and ecu as we all know , to get the full potential from my pipe obviously you need the correct air flow (right so far i hope ) a pc3 is goin on after xmas (thanx santa) . now i view ebay quite a bit , and have seen a few systems sold lately , a couple of which show wot look like to me standard filters (pic attached ) an not the ones in dpc catalogue . to the point wot filters come with termi kits !!
(i think people tell fibs on ebay me ) :o

ones i got with kit were a yellow sponge like
originals were a grey paper sort with plastic support around them - like your picture..

.:Phttp://www.ducatistore.co.uk/acatalog/Ducati_999_Performance_Parts.html

shows the difference..;)

[Edited on 28-10-2005 by chris999]

anybody had owt to do with the DT-1 foam ones that iv,e seen about ?

I've got DT-1's in mine. I've not had the bike back on the dyno yet to see how much difference the filter and PCIII have made.

tricky.