Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   998 / 996 / 916 / 748 (/forumdisplay.php?f=85)
-   -   M.O.T Failed??? (/showthread.php?t=24230)

Road Runner 18-Nov-2005 19:36

M.O.T Failed???
 
Took my 996 in for a M.O.T today and it failed on the head light diping the wrong way. I had the test done by the Woking M.O.T centre I must say they were very thorough even ran my bike on a rolling road to check the brakes and everything. Anyway it failed so how come Snell's past it for the last two years with the same head light in??:puzzled:
The head light is the original one, I also have one that I bought form the Spares Shack, UK spec they said cost me well over £200.0 and that has the dip going the same way :puzzled: The guy at the test centre said take it apart and bend the deflector around the other way and that should work Any one done this or had this problem:puzzled:
I have stripped one down but can't see how bending it around the other way will help looks like I will have to re make one at work not too much of a problem but so inconvenient.:mad:

Nattyboy 18-Nov-2005 19:39

Hi mate

I had this problem with my parallel import 916. Baines Rcaing do a little kit for a few quid to convert it...job done !!

Cheers
Nat

philthy 18-Nov-2005 19:39

Had the same problem with my 851.....

Piece of red insulating tape on the appropriate part of the glass fixed it.

It then passed.

Road Runner 18-Nov-2005 19:44

I suggested the tape route philthy he he wasn't having any of that:(

Steve B 18-Nov-2005 20:22

I did the same as Nat suggests.
Geoff Baines sold me a replacement deflector plate for my imported 916 back in 1997 for less than a tenner. It's a simple job. Once you have got the headlamp unit out it is just two small screws to get the USA/European plate off and replace it with a UK/Japan/Aussie one.

Steve

Rick 18-Nov-2005 20:34

If you do screw out the plate DONT throw it away:) I am thinking of buying another Ducce from the UK and bringing back to Sweden so I might buy it from you , IF i find a bike :cool:

philthy 18-Nov-2005 20:35

Quote:

Originally posted by Road Runner
I suggested the tape route philthy he he wasn't having any of that:(

Just go to ****** in *******

He'll pass it for you:lol::lol:;)

skidlids 18-Nov-2005 20:41

I replaced my deflector with one I made from a alloy coke can, easy peasy

Paul748bp 18-Nov-2005 20:58

i find that alot of dealers have different views on passing MOT's mine failed on my front wheel rims because they had a tiny kink in them from the dreadded pot holes but i was told from the local tyre fitters that they would have passed it ?????????????????

Stu748R 18-Nov-2005 21:38

Sorry to hear your news,the're being a bit a*al me thinks but Snells are straight down the line on all M O T'S so take it there and don't ask the questions.
Hope your well roadrunner.


All times are GMT +1. The time now is 05:27.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK