Brembo pad removal.
 

Hello again thicko here. Can someone explain how to remove the 4 pads from the brembo front calliper.

I see the clip and a pin that goes through. Is it just the case of removing the pin and the clip then the pads will come out.

Or have I to do something else. Thankyou.

pads
 

Push the wire clip in and pull the pin that slide thru from the side out! Might need pliers to pull it out!

Thanks Chris Ill have a go.

Don't forget a wiggle side to side to push piston back a little in order to pull out the pad, by that I mean the pad wiggles, not you!!!!! :sing: