Clutch Holding Tool
 

Was cleaning my clutch yesterday as it was a bit jerky/noisy and downchanges were a bit erratic...had all the plates etc out and noticed that the drum centre nut was finger tight!!!
That would explain the cr*p down changes and why the spring caps were polished from rubbing on the inside of the cover!

Anybody know where to get a decent clutch drum holder so that I can apply the 185Nm to tighten it up?
Alternatively, anybody nearby got one I could borrow?

Chhers,

RX

I'm in Redhilll, i have a home made one you can borrow if you can collect.

Excellent! U2U on its way to you.

RX

If you are after a bargain, the motion pro clutch holding tool that is used in the Haynes manual is only £ 14.50

http://www.allensperformance.co.uk/M...-CATALOGUE.doc

Phone +44 (0) 1949 836733 Fax +44 (0) 1949 836734

or Email sales@allensperformance.co.uk

Allen's Performance R & D Ltd. Unit B9 Moorbridge Road, Bingham,
Nottingham, England NG13 8GG

Nice one, some good bits on that site. :)