ST4S - Shocker
 

I have today taken delivery of my nice new Ohlins 46HCRS rear shock absorber with remote adjustment - ala ST4S for my ST4.

Would any kind ST4S owners post any photos of the remote valve and gas cylinder positions and fixings.

Also it didn't come with a C spanner and mine is out on loan, are they all the same, will the one that came with my ST4 for adjusting the Sachs unit fit.

Thanks as always

Do you need a c spanner for the ohlins shock? I thought they had a remote preload adjuster.

well its got a big nut thingy, so i assumed that you might have to adjust it to get it in range of the regulator valve, but im guesing.

Hope these help.....

Remote adjuster behind rear offside passenger footpeg mount...

View from the rear light showing bracket....

And finally the damping cylinder - same location as the standard one...

As for the spring adjustment - I've never needed to touch the locknuts but then I only ride singly... if you take a pillion you may wish to wind some preload on to get your sag close...

Hmm, the owners manual makes no mention of it and the tool kit doesn't include a c spanner.

no doubt another 4S owner will be along soon to help out.

I also notice that the only ST models available for 2006 are the ST3 and the ST3ABS. Hadn't reaised that.

You had a big Yeti on the back once Andy!

Funnily my tool kit came with a c spanner.... the one for chain adjustment on the 748 / 9** range!