Eprom identification help,please
 

Hi, for my sins I've bought a 996bip

It came with standard cans, so off to ebay and hello to a set of 45>50 termis with connector pipes.

As standard it runs rich, I could see that the sticker had been taken off the ECU so I had a look inside to see what eprom its got.

Its says COD 965053AAA

anyone know what this eprom is mapped for or whos eprom it is?

:) Crust

Cant see that part no in parts book,its close to a Ducati eprom no:
9650--AAA.
996 with 45/50 system - 965025AAA
996 with racing silencers - 965015AAA

If it's an aftermarket chip it may well say exactly what it is, eg "916-45mm") and then check these with the Ducati spares catalogue to see which chip it is:

96502394C - 916 Monoposto '94, silencers Racing
965013AAA - 916 Biposto silencers Racing
965015AAA - 996 Racing silencers
965014AAA - 748 Twin-seat silencers Racing
965024AAA - 748R Silencers Racing

96502694C - 916 Monoposto '94, silencers Ø 50
965027AAA - 916 Biposto silencers Ø 50
965025AAA - 996 Silencers Ø 50
96506501B - 996S Silencers Racing Ø 50
965028AAA - 748 Biposto silencers Ø 50
965029AAA - 748SPS Silencers Ø 50
965030AAA - 748R Silencers Ø 50

965031AAA - 996 Complete assembly Ø 50
965032AAA - 996SPS/916SPS Complete assembly Ø 50
96503394C - 916 Monoposto '94, complete assembly Ø 50
96503494C - 916 Biposto complete assembly Ø 50
965035AAA - 916SP Complete assembly Ø 50
965036AAA - 748 Biposto complete assembly Ø 50
965044AAA - 748SPS Complete assembly Ø 50
965037AAA - 748R Complete assembly Ø 50

965038AAA - 996 Complete assembly Ø 52
965039AAA - 996SPS/916SPS Complete assembly Ø 52
965040AAA - 916 Biposto complete assembly Ø 52
965035AAA - 916 SP Complete assembly Ø 52

cheers guys

Have checked the number again and its correct.

The bikes got an ITG filter and the chip label hasnt got any identification on it other than COD and the number.

Will check with Baines as they serviced it last

:) Crust

Hello

I mate in Ireland has just bought a 916 and is unsure about the chip installed this was his email to me, anybody have any ideas?

1997 916 models marked "MC 42" and "Made in Singapore" with two other tiny serial nos. 3880A and 9880E. I simply don't know if it is the original chip fitted to the bike or whether it was changed to match the 50mm Termi's when they were fitted.

any help would be great.

regards

TopiToo

I have one for a 996s for sale if you are interested ?

Kev