torque settings
 

What are the torque settings in Nm for spindle nuts for front wheel on 996r and nut torque setting. Thanks

Can't remember of the top of my head, however you can download a manual here;
http://www.duc.nu/manuals/

if the torgue is same on all models axle nut is "63nm"and the axle clamp bolts are"19nm"

Like sie748 said only there's a 5% tolerance for both of them so you'd better use a decent quality torque wrench.

Use Shell Retinax HDX2 on the threads and make sure you tighten the axle clamp bolts in a 1-2-1 fashion.