help refitting front wheel - urgent
 

i cant get the spindle back in on my 748s - any tips / is it just whack witha mallet?

wedge a flat blade screwdriver into the gap on the bottom of the fork leg tap in gently one each side should make it easier to slide in the spindle

When its refitted make sure you only tighten the mounting bolts to the correct torque!..........it may well be oval from overtightening...thats why its difficuly to fit?

make sure it fits without the wheel first,
youll see then if it oval or not :)

that was hard
wiggling witha long handle did the trick though
what torque for the clamp and the spindle bolts please?

Axle Nut is 63 Nm and the Axle clamp bolts are 19 Nm

thanks a lot
the feker was just not going in so i had resorted to the mallet!
anyway sorted now