Brembo Radial master Cylinder Question
 

Just fitted one to my 748 tonight - but how do you boys and girls mount your reservoirs ??

Pictures/ideas welcome !

Cheers
Nat

Race reservoir off the top yoke, quick drill and tap job

When you say race reservoir kev do you mean the brembo screw on jobber ? Will have to get myself a longer length of hose..nothings ever simple is it ??!!

Nat

What sort of bars do you have.....you could get a plug turned to interference fit in the top end with a threaded hole in its centre to mount a bracket......

Just get some slightly longer brackets made up and position them as they are normally. Also longer hose, available from JHP and new clips make the job spot on.

Below were just temporary, but you get the idea.

Bling it baby!

The handwriting is appauling!

With a touch of class.......

Diy...

I used original bracket and reservoir, bolted to one of the handlebar clamp bolts (use a longer allan bolt). You will need a longer hose to reach the reservoir