748 bhp
 

I have a 748 only base model but with Arrow 50mm full system and jhp chip and different filter. It came with a dyno test but not actually sure what BHP it really should be putting out.

It has two sheets one run shows gear changes and shows 91.73 bhp and a top speed of about 155mph. The second is a smooth incline graph with no dips showing max power 90.05 and speed of 125 before dropping down.

I thought the 748 put out about 100 a standard or is that the 748R . I thought it was comparable to the monster s4.
This is not a problem but curiosity

don't forget that is rear wheel italian stallions! - 10-15% lost from crank to wheel i think is normal?? a standard 748 is good at 90, i have heard of some at mid-high 80's. The R model was rated at 103 or 105 but once again this is at the crank - though have heard of some being dynoed at this sort of figure.
90hp is good especially if you use all of it in the right place.

my 748SP put out 100
with 50mm full system and chip
so sounds about ok if its a bip

haynes says :748 bip 98 bhp@11000
748 sps 100.3 bhp@11350
data sourced from motorcycle news road tests . So if MCN says so it must be true!!!!.

Thanks guys. I gather this would have been measured at rear wheel so that may equate to the 10% if at crank which would then be 101. Like I said it has been breathed on with system and chip. Is enough for me.



For now!!!! LOL