Does a 04 999S 54mm Termi Fit a 04 999 Bip ?
 

I have been offered a 54mm Termi system with Titanium silencer off of a 04 999S. Will it fit my 04 999 Bip. I know I will need a power commander for the ECU, but not sure if the front pipes will fit as the 999S has a deep sump engine and 999 standard doesn't. I beleive the fairing and bracketry are the same on the 999S and 999 Bip.

Both bikes have the cast early swinging arm.

Will I notice a significant performance improvement over my 50mm part system Termi which is fitted with the Termi ECU and Air Filters?

Any help appreciated.

Thanks
Andrew

Riders of Bridgwater have a 54mm Titanium (end can) 999s full system on sale for £1000 in vat!

Yep,the S pipe should fit the Bip.
They dont fit the other way round tho.

I can confirm it does mate as that's exactly what i did.

Nick,

did it fit OK or did it need cutting etc. What did you do about the ECU?

Goodmorning, if you do buy this I have a link pipe for a 999, as I discovered it will not fit an S - if you want to swop ?

Gordon I have sent a PM

Regards
Andrew

Fitted straight on mate. Did it myself,and i'm the least mechanical person going. Did the pipe and end can.

Have since changed some brake pads ;)

After doing some research it seems the ecu fitting is a bit trickier,as it's right at the bottom of the engine,under the battery tray,so my dealer did it for £30 cash at my 1000 mile service.