Ducati Sporting Club UK

Ducati Sporting Club UK (/msgboard.php)
-   Supersports: SS / SuperSport / Supersport 950 (/forumdisplay.php?f=88)
-   -   Swingarm refurbishment (/showthread.php?t=5130)

Otto Otto Otto 05-Feb-2004 09:15

Swingarm refurbishment
 
I have an 888 which has a few scuffs and scrapes on the swingarm which look a bit unpleasant and are rather eyecatching in side profile. I would like to tidy up said item and achieve as near to a standard finish as possible (not brightly polished!).
Has anyone any experience of this? I thought possibly a soft bead blast and then a lacquer might do it, but I would appreciate any tips!
Also I would like to know paint codes for wheels/frame/motor for '93 888 if poss!
I'm sure SS codes and S/A advice would apply also.
Regards
Justin

Iconic944ss 06-Feb-2004 07:46

Welcome on-board.....here is a link from a previous reply on here about paint codes...........

http://www.ducati.com/bikes/faq.jhtml#question20

Good Luck - Frank

Derek 06-Feb-2004 11:45

The original finish is anodised. To restore it properly would require the anodising to be removed, the swinging arm to be repolished to remove the marks and then re-anodised. A suitable silver paint might be an acceptable compromise.


All times are GMT +1. The time now is 16:10.

Powered by vBulletin 3.5.4 - Copyright © 2000 - 2025, Jelsoft Enterprises Ltd.
© Ducati Sporting Club UK