Steering Damper Bearing!
 

Does anyone out there know where I can buy an "offset spherical rod end bearing" like wots fitted to the dampers on 749/999 dukes.

Any advice would be appreciated b4 I try and e mail Mr Ohlins

steering damper
 

cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ?

steering damper
 

cant find a picture of what they look like is it the same as all steering dampers, if so what about RS components, if you dont have a catalogue i can look on friday for you when im in the office ?
regards
stu

Give Ktech or Kais Ohlins a bell.

Just take it all along to a local bearing stockist (Industrial or otherwise or possibly a Fastners stockist). They sell all sorts of good stuff in there these days as they have such diverse markets to try and satisfy!

not quite as easy as that Frank, if you look at the damper rod on a 749/999 you will see that where it bolts to one of the two mounting points , it is offset, not straifgt as on a 916 series duke.
Spose i hadbetter contac Ohlins.