exhaust rebuild
 

as the first part of my exhaust system rebuild, i would like to remove the baffles etc from my standard cans, any got a link to a how to site as my searches have all been in vain!:confused: specifically would like to know how much of the perforated centre pipe to remove and do you lightly wrap on rebuild

I have just done this mod on Louise's (mrsmonster) class B bike. It is easy enough to do but cutting off that lastt little bit of pipe took a while and lots of dremmel grinding discs. The bike sounds like a Ducati now but probably now power difference.

I did it working from inside the end of the can without taking the tube off which saved a lot of grinding and no welding back together.
I also cut a small V out of the inlet pipe bent it up and had it welded so the exhaust is more upswept.

http://www.ducatisuite.com/mufflers.html

Hope this helps.

Try this one Ross
http://www.ducatisuite.com/performancemods.html