853 parts wanted
 

Wanted: 853 pistons, barrels, EPROM chip and any other parts useful to me in converting my 748. SP or SPS cams and slipper clutch also required. Thx. Keith: 07788 864025

Hi

I was planing on converting my 748sps engine to a 853,in the end i went with a 955 engine.I collected everything apart from the 853 kit,i sold the engine to Baines Racing at Silverstone,as far as i know they still have it,might get your cams there.I still have a set of heads with bigger valves overhauled with new valaves and shimmed ready to go,i also have a set of light weight adjustable cam pulleys.
During my research into converting the 748 i was advised to fit a oil cooler as the 853 engine can run a little hot,i might have a oil cooler to.

Cheers
Colin Ridgway

853
 

My advice is speak to Chris at CJS racing. He built my 853R about 4 years ago and its still going like a goodun. It made 133bhp at the wheel. He knows his stuff when it comes to putting desmos together properly!!

http://www.cjsracing.co.uk/Chrisibal...R%20133BHP.htm

Thanks
 

Thanks for the advice people.