Testing the water... 748R/RS calipers
 

I've got a pair of BNIB (Brand New in Box) Ducati 748R / RS front brake calipers (with pads) that I'm thinking of selling...

They're the 4-pad design, with the bridge and standard mount (non-radial). Brand new pads are included as well.

These were intended for my project, but I've gone down a different route and these parts 'could' be surplus to my needs.

I'll sort out pictures, just wanted to see if anyone was interested.

Drop me a PM with a sensible offer (certainly nothing under £100)

Ta muchlies

G

are the 40mm or 65mm centres on the mounts?

They should be 65mm mounts.


Chris:burn:

P34 Brembo calipers ???

Yes, 65mm... Jus' like the ones pictured.

I'll get the Part No. off the box, if anyone wants that as well...

Just an observation on the bike, I notice it's like a mirrior its so clean and there is a label on it something clean....just wondering who cleaned it as they did a very good job?

Thanks

They've not made a very good job of the wheels though... <cough>:lol:

Nor the V piece :)

its just a free image I found via Google.

The P34/4 calipers come in silver & gold variations, the odd - ball is that it needs the front brake lines to extend a little further than the older 2-pad calipers and the hose mounting point is to the side (can be a problem).

Not to much of a problem frank, just go to someone who makes up brake hoses, ( like B&C Express, that is where I had mine done, but there are plenty of other places that do them) just twll them what lenghts youneed and what end fitments you require.


Chris:burn: