FIM Ultimap 748R chip
 

What advantages with it give my bike? its a 748R MY 2002.
i opened the ecu to check what chip is in it, the only markings it had is "748R"
except for the flatspot at full throttle around 5-6k rpm, bike starts fine everytime, idles steady at 1100 rpm

It will make a big difference, I have a 2000 748R with 50mm Termi end cans, like you i had a big flat spot, the FIM UM231 chip really does improve it, along with the stalling issue at junctions etc.
If you are interested I have a brand new, unused one.


Chris:burn:

Hi Chris, interested, depends on your price. and is it just plug and play if i decide to get it? or i have to take the bike and have it fitted by an authorize duc dealer or mechanic? thanks

Yes it is plug & play, but to get the best out of it, you would need to find someone with the software to adjust the chip, as it is fully programable for each injector etc.
If your happy with that, I will drop you a pm with the price.


Chris:burn:

Hi Chris, cant seem to find someone with the knowledge or software on how to adjust the chip. anyway if its ok with you if you can pm me the price so i have an idea.

bob