Banjo Bolt Brake Light Switch Problem
 

Has anybody encountered this problem.....
Having now fitted Brembo radial pumps to the brake and clutch, i have now found this problem, the brake side has a single B.Bolt switch on it with a line made up by Earl's.
On full lock (right hand down) the wires from the bottom of the B.Bolt sw have been hitting the top of the airtube and are in danger of being cut through/sheered off...:puzzled:
Any experience of this or idea's most welcome.

Gav

no marks on my air ducts.
only thing i get is the master cylinder touching the clocks on opposite lock