Mounting the clocks
 

Just fitted the new headlight housing to the 748r, since the old one was destroyed i couldnt tell how the clocks were mounted to the housing, Now i can see it rests on 2 rubber blocks, and it is bolted at the right hand side. (Only one bolt to hold the clocks on? is this right?) If thats how its mounted there must be a spacer because there is a gap between the housing and the clocks when it sits on the rubber blocks! So what is the spacer and what sort of bolt is it?

From memory, there should be 3 rubber stand-offs, not 2. Couple of quid each from your dealer.

yep 3 rubber standoffs isolate the clocks from the vibes. they are about 12-15mm long with smm threads at each end

Clocks
 

You can also get these same rubber mounts from RS Components in corby