Fairing Brackets & Gp
 

Firstly now i have got my pc sorted just wanna say a big thanks to SCOTTCH for all the beer he gave me at the gp at Donington it was great to meet you and talk with you thanks Nathan


Hope the 999r is still ok


I have got some 998 fairing ( the one with the two sides 1 piece and bellypan seperate ) for my bike and am after the brackets that hold the bellypan in place. Anyone know where i can get some from or drawing that i can copy to make them thanks

Nathan

come on some one must have some
thanks for all the hlep

Mine just clips onto the fairing sides and is held in place like that...

A t the rear bottom of the gearbox casing is a hole, its perhaps got the std fairing mounting in it? This allen headed bolt doesnt go in to a thread as such but screws into a brass taper plug. So a couple of turns and it can be pulled out.
Tharts where i mounted my 998 track fairings. I made my own brackets. Its easy go on do it! Make one out of cardboard first then copy the shape to a bit of stainless! drill a couple of holes mount a dzus and hey presto. Oh same for other side. :D