Registered Forum User
GTL
Bikes: Ducati 888, Suzuki RG500, Triumph Preunit
Posts: 403
Join Date: Jun 2005
Location: Nottingham
Mood: On the up
In hindsight I should have used a cutting disc on a dremel to part cut through the nuts. I did this on one of the other nasty looking nuts and the nut spun off after a few knocks with the cold chisel without hardly marking the stud. I'm not sure there is room for a nut splitter unless you can get mini versions. I hope the shiny pipes will be worth the hassle...
Keith