Quote:
| Originally Posted by chris.p Ok then, what would the torque values be for 12 sided titanium nuts for the wheel & sprocket side on a 748 be please. Chris.  |
Are you referring to the Corse mag swingarm, Chris?
If so those large 55mm 12-sided nuts aren't made of Ti. They are hard anodized Al-nuts. The eccentric pinch bolts and the cush drive nuts are made of Ti, however.
The torque values are as follows:
- Lefthand sprocket carrier nut: 235 Nm.
- Righthand wheel nut (L/H tread): 295 Nm.
The reason the torque values are significantly higher than the stock ones are due to the much coarser thread on the Corse nuts.
Good luck!